Step 5: General Cleanup
Cleaning up an abandoned, neglected, or overgrown cemetery is often the most time-consuming part of a restoration project. The guidelines below provide helpful tips for how to address various forms of debris and vegetation but are not comprehensive. We suggest contacting a someone with cemetery restoration experience who can help create a plan for cleanup.
Trash Pickup
Cemeteries often accumulate trash and discarded flowers that are unsightly or create hazards to visitors. Removing trash is an important first step to prevent injury to volunteers from broken glass, rusty wire, or other hazards.
- Remove only obvious refuse from the site, such as cans, wrappers, or other trash
- Remove discarded flowers and wreath stands
- Leave any intact vintage glassware or ceramics (medicine bottles, porcelain, etc) in place, as these may have been placed purposefully on gravesites
- Leave any stone or concrete markers in place; it is better to leave possible markers undisturbed than to remove them accidentally
Underbrush and Fallen Tree Removal
Low shrubs and grasses can obscure gravesites and markers and make other restoration work more difficult. Removing underbrush can help improve movement through the site and overall aesthetics. Fallen trees may be lying on top of gravesites and markers. Removing downed trees may uncover significant features and will improve access for later stages, such as ground-penetrating radar.
- Remove low shrubs with limb loppers as close to the ground as possible; an inch or two left above ground can become a tripping hazard
- Use powered trimmers and edgers carefully and sparingly to avoid damaging markers; even a plastic string trimmer can chip away at marble and other stones
- Remove brush to an off-site location if possible or pile in an area confirmed to be clear of gravesites
- Mark clear paths to follow with wheelbarrows to avoid damaging grave markers
- Use extreme care with chainsaws to avoid hitting any grave markers beneath fallen trees; even a brief touch will damage the chain and marker
- Make top cuts on logs and then use a cant hook or log peavey to roll logs over and finish the cuts from the other side
- Remove cut wood from the site; to aid disposal, advertise to the local community that you have free firewood
Standing Tree Removal
Generally, we recommend that standing trees are not removed due to the potential for injury or damage to grave markers. Dead or leaning trees that are a hazard should be removed only by trained professionals who can minimize damage to the cemetery.
